上海郜盟为您专业解读木材削片机CE认证：

1、木材削片机欧盟CE认证指令

MD机械指令：2006/42/EC

2、木材削片机欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018机械安全.机械电气设备.第1部分：一般要求

EN 13525:2020Forestry machinery - Wood chippers - Safety 林业机械.木材削片机.安全

3、EN 13525:2020适用范围：

This document specifies safety requirements and their verification for design and construction of, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping.

This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components or by separate integrated infeed components such as rollers or conveyors integral to the infeed chute. Wood chippers may be powered either by an external power take-off,hydraulics etc. or by an integral power source such as an internal combustion engine.

This document does not cover:

— requirements relating to national road regulations arising from transport between work sites;

— hazards arising from any self-propelled function;

— hazards arising from the transmission of power from an external power source – e.g. power take-off drive shafts;

— any machines where the infeed chute is fitted with an extension table or an integrated conveyor that is protruding beyond the outermost lower edge of the infeed chute and the Lower Protective Device of the infeed chute;

— hazards arising from the engine pull starting of an integral power source;

— hazards arising from mechanical loading;

— vertical infeed chute chippers;

— electromagnetic aspects of the chippers;

— shredders/chippers to be covered by EN 13683;

— any machines that are only loaded mechanically;

— additional mechanical discharge systems for woodchips which are not part of the chipping mechanism e.g.conveyors.

For machines that can be both manually and mechanically loaded, this document is only covering the safety of the manual loading.

NOTE 1 Any additional requirements related to use with both mechanical and manual feed that could affect safe use or which are necessary to maintain the integrity of protective devices are outside the scope of this document. Such additional measures are intended to be determined by risk assessment carried out by the manufacturer.

This document deals with all significant hazards, hazardous situations and events relevant to wood chippers, when they are used as intended and under the conditions foreseeable by the manufacturer (see Annex A).

In addition, it specifies the type of information to be provided by the manufacturer on the safe use of these machines.

It is not applicable to environmental hazards (except noise).

NOTE 2 The noise test code described in this document does not comply with the outdoor noise directive 2000/14/EC.

This document is not applicable to wood chippers which are manufactured before the date of publication of this document by CEN.

本文件规定了林业、农业、园艺和景观美化中使用的自行式、安装式、半安装式和拖挂式碎木机的设计和施工的安全要求及其验证。

本文件适用于静止时使用的削片机，该削片机通过水平或接近水平的进料槽手动装载木材，并且进料动作由作为进料部件的削片部件或单独的集成进料部件（如与进料槽集成的滚筒或输送机）执行。木材削片机可以由外部动力输出装置、液压装置等提供动力，也可以由整体动力源（如内燃机）提供动力。

本文件不包括：

--与工作现场之间运输产生的国家道路法规相关的要求；

--任何自推进功能产生的危险；

--外部动力源（例如动力输出驱动轴）动力传输引起的危险；

--任何机器，其中进料槽配有延伸台或集成输送机，突出超过进料槽最外下边缘和进料槽下部保护装置；

--由发动机整体动力源的拉动启动引起的危险；

--机械荷载引起的危险；

--垂直进料槽削片机；

--削片机的电磁方面；

--EN 13683涵盖的碎纸机/削片机；

--任何仅以机械方式装载的机器；

--用于木片的附加机械排放系统，这些系统不是木片机构的一部分，例如输送机。

对于既可以手动装载也可以机械装载的机器，本文件仅涵盖手动装载的安全性。

注1：与机械和手动进给使用相关的任何额外要求，可能会影响安全使用，或是维护保护装置完整性所必需的，都不在本文件的范围内。此类额外措施旨在通过制造商进行的风险评估来确定。

本文件涉及在制造商可预见的条件下按预期使用削片机时，与削片机相关的所有重大危险、危险情况和事件（见附录A）。

此外，它还规定了制造商提供的关于这些机器安全使用的信息类型。

不适用于环境危害（噪声除外）。

注2：本文件中描述的噪声测试规范不符合2000/14/EC室外噪声指令。

本文件不适用于CEN在本文件发布日期之前制造的碎木机。

4、木材削片机CE认证流程

1 提交CE申请

2 准备测试样机和技术资料

3 样机测试与整改

4 技术资料审核与整改

5 公告机构审核通过后，工厂获得CE证书

6 设备加贴CE标识，顺利在欧盟市场流通

上海郜盟-欧盟公告机构授权-专业CE认证

了解更多：

机械设备CE认证

CE认证是什么认证？

欧盟CE认证

上海郜盟，专业CE认证技术服务公司，致力于中国制造全球化服务！提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务，高效可靠！

未经允许不得转载！